ChristinaJudy Pavers July 01st, 2018 - 09:47:13
After fixing any sagging areas look for individual pavers that are sitting higher or lower than the surrounding pavers. A paver that sits higher can often be leveled by using a rubber mallet to force it into its proper position. If its too high or doesnt move you may have to remove it so you can remove some of the sand thats below the paver. If it sits low youll have to remove it to add sand until its level. To remove the paver you can purchase a paver removal tool or you can use a small pry bar to loosen the paver and lift it out of its space being careful not to crack or chip the paver. Its a good idea to pressure wash the surface on a yearly basis. Pressure Washing cleans the surface of your pavers and also remove much of the organic material growing between the pavers. Removing the organic material reduces the amount of bugs living in your paver area and helps keep the pavers stable.
Thin pavers were created to remodel existing pool decks patios sidewalks and front entries. They are perfect for any non-vehicular application that remodels an existing concrete slab. By a technical definition thin pavers are not considered pavers. Instead they are considered to be a tile. Their thickness relative to their shape prevents them from being considered a paver. Typically thin pavers are anywhere from three quarters of inch in thickness to an inch and a quarter. Since they are about half the thickness of regular pavers they should cost less right? Unfortunately on a material only basis thin pavers cost the same as thick pavers. The reason for this is that overwhelmingly thick pavers are in much higher demand than thin pavers. Therefore it is a burden on the production company to produce their less frequently demanded thin counterparts.
Sealing pavers will enhance the color of the pavers giving a new look. Once applied a sealant the surface will remain stain free and it will also be easy to clean it. Bricks absorb oil and stains fast making your pavement dirty and slippery. High pressure cleaning is not recommended for brick pavers as it can damage the bricks. Always clean it using a low pressure cleaner. Color pigments are often used in concrete pavers. Rampant usage of chemicals can cause fading or discoloration of the pavers. Consult a professional before start cleaning concrete pavers. After cleaning you can apply a sealant so that the color remains protected for a long time.
A common question that we encounter is whether you can use a thin paver on top of base material. The answer is not absolute. In reality it depends on the circumstances of the project and the proficiency of the crew or individual installing the pavers in the first place. The one aspect of the project that must remain constant if considering the use of thin pavers over base is that the area to be paved must only be used as a pedestrian area that wont endure the weight of vehicular traffic. Using a thin paver on compacted base is typically frowned upon within the paver industry. They are normally used to remodel an existing concrete tile or acrylic surface.