ChristinaJudy Pavers July 07th, 2018 - 09:11:21
It is advised to lay pavers in the sun. If your pavers dont get enough sunlight there would be a chance of them getting infested with moss. This not only degrades the appearance of the pavers but also decreases their durability. Sealing pavers can prevents algae growth. Another problem often springs up due to the salt present in most of the pavers; efflorescence. This is a white chalky residue that forms on the surface of the pavers in contact with water or on its own. This can be cleaned using concentrated cleaners. Sealing pavers minimizes formation of the residue. Pavers being regularly tread on must be cleaned and polished to keep them intact for a long time.
Pavers made of concrete go well with flagstone brick and concrete walkways or patios. If you live in climates where winter temperatures dip below zero concrete pavers are a good choice. Theyre able to hold up well in extreme temperatures. Choose pavers in shades such as ochre pink bisque white or sand. Pavers come in keyhole x-shape y-shape pentagon hexagon and fan designs. Pavers are made of sandstone blue stone granite and limestone as well. Such pavers are typically quite pricey. These kinds of pavers are usually used for patios and sidewalks or around pools or fountains. You can choose pavers made of these materials in a variety of geometric designs.
Thin pavers were created to remodel existing pool decks patios sidewalks and front entries. They are perfect for any non-vehicular application that remodels an existing concrete slab. By a technical definition thin pavers are not considered pavers. Instead they are considered to be a tile. Their thickness relative to their shape prevents them from being considered a paver. Typically thin pavers are anywhere from three quarters of inch in thickness to an inch and a quarter. Since they are about half the thickness of regular pavers they should cost less right? Unfortunately on a material only basis thin pavers cost the same as thick pavers. The reason for this is that overwhelmingly thick pavers are in much higher demand than thin pavers. Therefore it is a burden on the production company to produce their less frequently demanded thin counterparts.
Sealing pavers immediately after installation decreases chances of getting displaced or disfigured. The pavers set in sand move and adjust so in case a piece of pavers is chipped off in the process immediately replace it. So keeping a few extra pavers in stock is a good idea in case the particular design suddenly goes off the market. You dont want to ruin a perfectly symmetrical patio with one mismatched paver. If the pavers are laid on sand check them annually to see if the pieces have sunk. Brush in sand in the space in between them if necessary. The sand in the joints should be half as high as the level of the pavers. Sealing concrete in between prevents this problem.