Aceline Kari Bernier Pavers July 09th, 2018 - 09:28:02
A common question that we encounter is whether you can use a thin paver on top of base material. The answer is not absolute. In reality it depends on the circumstances of the project and the proficiency of the crew or individual installing the pavers in the first place. The one aspect of the project that must remain constant if considering the use of thin pavers over base is that the area to be paved must only be used as a pedestrian area that wont endure the weight of vehicular traffic. Using a thin paver on compacted base is typically frowned upon within the paver industry. They are normally used to remodel an existing concrete tile or acrylic surface.
A solution of bleach powder and water in a proportion of 1:10 can also be used for cleaning pavers. Apply the solution over the pavers with a brush and then scrub. Remember that bleach can cause discoloration. Therefore try it on one of the pavers in a corner and see the result before you start cleaning. For removing paint from pavers paint thinner can be applied on the pavers and then scrape it out with a rag carefully. The most difficult job is to remove rust stains from pavers. When the normal methods do not work use an appropriate chemical with the help of a professional. After cleaning pavers allow it to dry.
Stone Pavers: This type of paver will give spectacular beauty when decorating your residential place. Stone pavers are comprised of premium natural stones that are extremely durable; thus providing protection against excessive weight. Weather a problem? Not with these. They also have history by their side. They have been used for a millennium. Such an example is the old roads throughout Europe or Asia. Common types of stone pavers are Granite Marble Bluestone and Porphyry. Marble paver are commonly used for the patio deck fireplaces and bathrooms. Granite pavers are commonly used for the patio deck pool deck driveway and walkway. Bluestone pavers are a common idea for gardens. Finally Porphyry pavers are used for walkway mostly.
Your paver contractor should be able to tell you offhand which material is used and how much is needed. Obviously if a paver contractor cant explain this thoroughly to you its time to move on to a new paver contractor. The foundation of the paver installation process must be precise. The soil density is vital to the paver installation process and if you want the paver installation to last it really is best to call in a qualified professional paver contractor. A weak or saturated area of soil may not reach the required density levels for proper paver installation and then naturally the area would need to be modified in order for the pavers to lay properly. The basic goal outside of beautiful and sound construction of the paver area is to create the soil foundation a minimum of 95% Proctor density. Without great enough density the inevitable is bound to happen sooner or later and the pavers may crack split or cave in under you without warning. A qualified paver contractor can explain exactly how this density requirement applies to your property and what can be done to improve it prior to the paver installation.