Adelisa Villette Benoit Pavers June 17th, 2018 - 18:34:47
A common question that we encounter is whether you can use a thin paver on top of base material. The answer is not absolute. In reality it depends on the circumstances of the project and the proficiency of the crew or individual installing the pavers in the first place. The one aspect of the project that must remain constant if considering the use of thin pavers over base is that the area to be paved must only be used as a pedestrian area that wont endure the weight of vehicular traffic. Using a thin paver on compacted base is typically frowned upon within the paver industry. They are normally used to remodel an existing concrete tile or acrylic surface.
Your job does not end with sealing pavers. You have to clean pavers regularly because damp weather makes pavers absorb moisture from the environment along with dust and can spoil the show of your pavement. So clean them and mop them regularly. Avoid using any highly concentrated chemicals that damage the environment. Always look for natural formulae for cleaning. You can use a high pressure cleaner and spray the pavers with salt water. For cleaning stains that are lighter a solution of detergent and warm water would be advisable. However stains of petrol or oil will not dissolve in water or soap. You can use a commercial product available in the market under the guidance of a professional. Another way of cleaning oil or petrol stains is the use of kitty litter on pavers on the previous night and sweep off the next day.
Pavers can be installed in a variety of unique and interesting patterns to add flair and interesting qualities to your home garden or business. When laying pavers long straight lines should be avoided and either a basket weave pattern or a varying unique pattern should be used in straight line paver installation. This creates an ambiance that is reflective of your personality as well as the home or business personality. A qualified paver contractor should be able to interest you in all kinds of unique paver designs and show you exactly how paver installation can dramatically beautify your home or business. When looking for a paver contractor make sure he or she is willing to listen to your ideas and thoughts and then build upon them. A quality paver contractor will come will a solid reputation and references that are impeccable. Most of all a paver contractor should be enthusiastic about your project. It is a project of creativity and artistic impression combined with skill and knowledge. A lack of enthusiasm can be taken for a lack of artistic ability.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.