ChristinaJudy Pavers July 02nd, 2018 - 09:11:59
Your paver contractor should be able to tell you offhand which material is used and how much is needed. Obviously if a paver contractor cant explain this thoroughly to you its time to move on to a new paver contractor. The foundation of the paver installation process must be precise. The soil density is vital to the paver installation process and if you want the paver installation to last it really is best to call in a qualified professional paver contractor. A weak or saturated area of soil may not reach the required density levels for proper paver installation and then naturally the area would need to be modified in order for the pavers to lay properly. The basic goal outside of beautiful and sound construction of the paver area is to create the soil foundation a minimum of 95% Proctor density. Without great enough density the inevitable is bound to happen sooner or later and the pavers may crack split or cave in under you without warning. A qualified paver contractor can explain exactly how this density requirement applies to your property and what can be done to improve it prior to the paver installation.
We frequently install thin pavers on top of base material when the project calls for it. For instance if we are remodeling an existing pool deck and the client wants to expand the deck area we will simply excavate the addition compact four inches of base material and install the thin pavers on top so that they are flush with the thin pavers we just installed over top of the existing pool deck. The reason we choose to use a thin paver in this example is to maintain color shade and variation consistency throughout the entire project. Thick and thin pavers never match exactly because they are manufactured at different times using different aggregates. The variation in color dye blending and moisture content of the sand and aggregates during the manufacturing process is what gives each batch of pavers its own distinct look.
A solution of bleach powder and water in a proportion of 1:10 can also be used for cleaning pavers. Apply the solution over the pavers with a brush and then scrub. Remember that bleach can cause discoloration. Therefore try it on one of the pavers in a corner and see the result before you start cleaning. For removing paint from pavers paint thinner can be applied on the pavers and then scrape it out with a rag carefully. The most difficult job is to remove rust stains from pavers. When the normal methods do not work use an appropriate chemical with the help of a professional. After cleaning pavers allow it to dry.
Further since sealing pavers keeps them protected from formation of microorganisms they look well maintained and clean because of which the appearance of not only your paver but also the entire landscape is enhanced. Sealing pavers substantially deepens the color of pavers which gives it a crisp elegant look which further provides aesthetic appeal to your home. Cost benefits - Having pavers installed is an investment as it has minimal cost of maintenance and adds durability to the structure. Sealing a paver gets you great returns. Neither does it demand frequent maintenance nor does it damage easily. Further sealers are flexible and versatile in their usage and the same sealer can be used for different kinds of surfaces such as cement or stone.