Adalene Astrid Cuillerier Pavers June 15th, 2018 - 12:15:46
It is advised to lay pavers in the sun. If your pavers dont get enough sunlight there would be a chance of them getting infested with moss. This not only degrades the appearance of the pavers but also decreases their durability. Sealing pavers can prevents algae growth. Another problem often springs up due to the salt present in most of the pavers; efflorescence. This is a white chalky residue that forms on the surface of the pavers in contact with water or on its own. This can be cleaned using concentrated cleaners. Sealing pavers minimizes formation of the residue. Pavers being regularly tread on must be cleaned and polished to keep them intact for a long time.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.
Pavers can be installed in a variety of unique and interesting patterns to add flair and interesting qualities to your home garden or business. When laying pavers long straight lines should be avoided and either a basket weave pattern or a varying unique pattern should be used in straight line paver installation. This creates an ambiance that is reflective of your personality as well as the home or business personality. A qualified paver contractor should be able to interest you in all kinds of unique paver designs and show you exactly how paver installation can dramatically beautify your home or business. When looking for a paver contractor make sure he or she is willing to listen to your ideas and thoughts and then build upon them. A quality paver contractor will come will a solid reputation and references that are impeccable. Most of all a paver contractor should be enthusiastic about your project. It is a project of creativity and artistic impression combined with skill and knowledge. A lack of enthusiasm can be taken for a lack of artistic ability.
Sealing pavers will enhance the color of the pavers giving a new look. Once applied a sealant the surface will remain stain free and it will also be easy to clean it. Bricks absorb oil and stains fast making your pavement dirty and slippery. High pressure cleaning is not recommended for brick pavers as it can damage the bricks. Always clean it using a low pressure cleaner. Color pigments are often used in concrete pavers. Rampant usage of chemicals can cause fading or discoloration of the pavers. Consult a professional before start cleaning concrete pavers. After cleaning you can apply a sealant so that the color remains protected for a long time.