Adalene Astrid Cuillerier Pavers June 17th, 2018 - 17:47:57
Pool pavers are a popular material for creating decks and patios around the pool. The three primary materials that pavers come in are stone cement and brick. Stone pavers are a natural material so these pavers traditionally come in a rectangle shape. Since brick and cement pavers are manmade you can find pavers in different shapes that allow you to create the design or look you want. Square and rectangular pavers are the best choice for pool pavers because these pavers have smooth edges and textured surfaces. The shape of the paver affects the pattern you can create. A paver shaped like a zigzag for example can create an interlocking pattern. Square pavers on the other hand create a side-by-side pattern. Traditionally pool patterns include square and rectangular pavers to sit side-by-side but you can also turn the square and rectangular pavers at an angle to create a diamond pattern.
In fact you can typically notice a serious difference between any two paver areas in color shade or variation whether these areas were simply produced at different times or theres a difference in product thickness. This aesthetic sacrifice does not work for most clients and using a thin paver over prepared base for a purely pedestrian area is completely functional other than the aforementioned compaction difference when compared with a thick paver. If a client is simply interested in a new paver patio then thick pavers are the order of the day. Believe or not but thick pavers cost the same as thin pavers! Therefore there is not a difference in the project cost for the client when choosing to construct a brand new patio. Occasionally however a client simply likes the look be it shape or color of a thin paver vendor better than any of the options from the thick paver option. If this is the case we maintain that the aesthetics are the main priority of the project and we will utilize the thin pavers over prepared base.
As stated pavers come in a number of colors and materials. The most popular kinds of pavers are made of brick used to enhance the look of sidewalks and driveways. Brick pavers are also simple to clean and only require a scrub brush and some soap and water. You can pick brick pavers in a variety of designs too. Choices include fan-shaped w-shaped x-shaped rectangular and keyhole designs. Rectangular brick pavers are one of the most common pavers available. Therefore if youre confused about what to pick you wont go wrong with this design or material. Select from colors such as buff brown red or green.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.