ChristinaJudy Pavers July 20th, 2018 - 09:11:51
Pavers add to the beauty of your landscape. A well maintained pavement reflects on the beauty of your house. Therefore it is essential that you maintain it well. Cleaning pavers would be easy once you know about pavers. Choosing wrong cleaning materials and faulty cleaning methods spoil the look of pavements. Therefore it is important that you learn about pavers before venturing into cleaning. Concrete or limestone is generally used in making pavers. Often bricks and natural stones are also used. You should ensure that pavers are sealed as soon as they are laid in your backyard driveways or patio. If you do not seal it stains and cracks on the surface of the pavers can damage your pavements soon.
Whether you are designing or updating your pool or backyard areas consider pavers. Cover pool decks patios and walkways with pavers to create a safer area for your friends and family to spend time around the pool and add the finishing touch to your outdoor design and decor. Versatile Flooring Inc. brings over 30 years of combined experience in providing quality floor installation and kitchen and bathroom remodeling to South Florida. We are dedicated to providing skilled work and superior customer service to each client we have the privilege of serving. Your house is your home and we enjoy creating floors kitchens and bathrooms youre proud to share with your friends and family.
Sealing pavers immediately after installation decreases chances of getting displaced or disfigured. The pavers set in sand move and adjust so in case a piece of pavers is chipped off in the process immediately replace it. So keeping a few extra pavers in stock is a good idea in case the particular design suddenly goes off the market. You dont want to ruin a perfectly symmetrical patio with one mismatched paver. If the pavers are laid on sand check them annually to see if the pieces have sunk. Brush in sand in the space in between them if necessary. The sand in the joints should be half as high as the level of the pavers. Sealing concrete in between prevents this problem.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.