Adaliz Louise Auclair Pavers March 27th, 2018 - 09:07:01
They can give the best advice on materials and refer possible contacts from landscaping suppliers. Different pavers suit certain applications so make sure that the materials needed are right for the said project. It will be a waste of money if the wrong type of pavers is installed. Concrete pavers are 100% manufactured material. It is made with two ingredients. Cement and aggregate. It can be manufactured and produced to withstand any kind of harsh weather conditions and endure high or low traffic areas. It is available in different styles for different applications. Concrete pavers are made to look and resemble natural stone at a fraction of a cost of real stones.
What is the difference between thick and thin pavers? Where should you use either product? Do thick pavers cost more than thin pavers? Can I install thin pavers on top of my driveway? These are common questions we get from homeowners all of the time. Thick pavers range from two and three eighths of an inch to three and half inches in thickness. They are typically used in new construction. When you build a new home and choose pavers for your hardscaping thick pavers will be used. If you add a new pool to your existing home and decide to install pavers as the decking surface thick pavers will be used. If you want a new patio in your backyard thick pavers will be used. If you want to redo your driveway with pavers the existing concrete should be removed and thick pavers will then be installed on top of base material.
Sealing pavers immediately after installation decreases chances of getting displaced or disfigured. The pavers set in sand move and adjust so in case a piece of pavers is chipped off in the process immediately replace it. So keeping a few extra pavers in stock is a good idea in case the particular design suddenly goes off the market. You dont want to ruin a perfectly symmetrical patio with one mismatched paver. If the pavers are laid on sand check them annually to see if the pieces have sunk. Brush in sand in the space in between them if necessary. The sand in the joints should be half as high as the level of the pavers. Sealing concrete in between prevents this problem.
Your paver contractor should be able to tell you offhand which material is used and how much is needed. Obviously if a paver contractor cant explain this thoroughly to you its time to move on to a new paver contractor. The foundation of the paver installation process must be precise. The soil density is vital to the paver installation process and if you want the paver installation to last it really is best to call in a qualified professional paver contractor. A weak or saturated area of soil may not reach the required density levels for proper paver installation and then naturally the area would need to be modified in order for the pavers to lay properly. The basic goal outside of beautiful and sound construction of the paver area is to create the soil foundation a minimum of 95% Proctor density. Without great enough density the inevitable is bound to happen sooner or later and the pavers may crack split or cave in under you without warning. A qualified paver contractor can explain exactly how this density requirement applies to your property and what can be done to improve it prior to the paver installation.