Home / Pavers / Incredible noce tumbled travertine pavers images / Tumbled Travertine Pavers Pattern Rhpinterestcomau X Shown In A Subway Rhpinterestcom X Noce Tumbled Travertine Pavers Shown In A Subway Pattern Rhpinterestcom.jpg
ChristinaJudy Pavers June 09th, 2018 - 19:31:34
Be it a pool deck driveway patio or walkway your pavers should be maintained on a regular basis to keep them looking as beautiful as the day they were installed. First do a visual inspection for sagging areas where water will collect and pool. These areas are often caused by water from a hose or rain washing earth foundation material and sand into a hollow space below the paver foundation. Once pooling is noticeable these sagging areas often widen quickly do to the increase of water draining in these areas. Its important for the hollow to be filled and stabilized before leveling the pavers otherwise you can be performing the same task next year. To fix this situation can be tricky. First remove the sagging pavers find the hollow and fill it with a foundation material. Next you want to tamp or pack the foundation material to within two inches of the bottom of the existing pavers. Fill the remaining 2 inches with sand and tamp it level with the bottom of the existing pavers and replace the removed pavers.
They can give the best advice on materials and refer possible contacts from landscaping suppliers. Different pavers suit certain applications so make sure that the materials needed are right for the said project. It will be a waste of money if the wrong type of pavers is installed. Concrete pavers are 100% manufactured material. It is made with two ingredients. Cement and aggregate. It can be manufactured and produced to withstand any kind of harsh weather conditions and endure high or low traffic areas. It is available in different styles for different applications. Concrete pavers are made to look and resemble natural stone at a fraction of a cost of real stones.
Your paver contractor should be able to tell you offhand which material is used and how much is needed. Obviously if a paver contractor cant explain this thoroughly to you its time to move on to a new paver contractor. The foundation of the paver installation process must be precise. The soil density is vital to the paver installation process and if you want the paver installation to last it really is best to call in a qualified professional paver contractor. A weak or saturated area of soil may not reach the required density levels for proper paver installation and then naturally the area would need to be modified in order for the pavers to lay properly. The basic goal outside of beautiful and sound construction of the paver area is to create the soil foundation a minimum of 95% Proctor density. Without great enough density the inevitable is bound to happen sooner or later and the pavers may crack split or cave in under you without warning. A qualified paver contractor can explain exactly how this density requirement applies to your property and what can be done to improve it prior to the paver installation.
Your job does not end with sealing pavers. You have to clean pavers regularly because damp weather makes pavers absorb moisture from the environment along with dust and can spoil the show of your pavement. So clean them and mop them regularly. Avoid using any highly concentrated chemicals that damage the environment. Always look for natural formulae for cleaning. You can use a high pressure cleaner and spray the pavers with salt water. For cleaning stains that are lighter a solution of detergent and warm water would be advisable. However stains of petrol or oil will not dissolve in water or soap. You can use a commercial product available in the market under the guidance of a professional. Another way of cleaning oil or petrol stains is the use of kitty litter on pavers on the previous night and sweep off the next day.