ChristinaJudy Pavers June 17th, 2018 - 17:23:45
After fixing any sagging areas look for individual pavers that are sitting higher or lower than the surrounding pavers. A paver that sits higher can often be leveled by using a rubber mallet to force it into its proper position. If its too high or doesnt move you may have to remove it so you can remove some of the sand thats below the paver. If it sits low youll have to remove it to add sand until its level. To remove the paver you can purchase a paver removal tool or you can use a small pry bar to loosen the paver and lift it out of its space being careful not to crack or chip the paver. Its a good idea to pressure wash the surface on a yearly basis. Pressure Washing cleans the surface of your pavers and also remove much of the organic material growing between the pavers. Removing the organic material reduces the amount of bugs living in your paver area and helps keep the pavers stable.
Clay brick pavers are made of natural clay that is fired and manufactured at extremely high temperatures. This process makes the bricks strong and ensures that the ingredients are bonded together. Brick pavers are proven to be effective and are considered to be one of the most durable type of paver material. It has been used for thousand of years and continues to be a popular choice. These pavers do not use any dye or pigments. Clay is a natural material it maintains its natural color and will never fade through time. It is available in different shapes and sizes that will suit any type of application.
It is advised to lay pavers in the sun. If your pavers dont get enough sunlight there would be a chance of them getting infested with moss. This not only degrades the appearance of the pavers but also decreases their durability. Sealing pavers can prevents algae growth. Another problem often springs up due to the salt present in most of the pavers; efflorescence. This is a white chalky residue that forms on the surface of the pavers in contact with water or on its own. This can be cleaned using concentrated cleaners. Sealing pavers minimizes formation of the residue. Pavers being regularly tread on must be cleaned and polished to keep them intact for a long time.
Be it a pool deck driveway patio or walkway your pavers should be maintained on a regular basis to keep them looking as beautiful as the day they were installed. First do a visual inspection for sagging areas where water will collect and pool. These areas are often caused by water from a hose or rain washing earth foundation material and sand into a hollow space below the paver foundation. Once pooling is noticeable these sagging areas often widen quickly do to the increase of water draining in these areas. Its important for the hollow to be filled and stabilized before leveling the pavers otherwise you can be performing the same task next year. To fix this situation can be tricky. First remove the sagging pavers find the hollow and fill it with a foundation material. Next you want to tamp or pack the foundation material to within two inches of the bottom of the existing pavers. Fill the remaining 2 inches with sand and tamp it level with the bottom of the existing pavers and replace the removed pavers.