Adelina YolandeD uffet Pavers July 22nd, 2018 - 09:28:04
Unsealed interlocking pavers are susceptible to staining chipping and growth of creepers through the cracks and edges. Although pavers require minimum maintenance regularly cleaning of the pavers and occasionally sealing them is necessary to preserve the well-tended look of your pristine patio or driveway. Sealing pavers is quite easy considering that a lot of good quality acrylic based sealants are available in the market. It is important to identify the material of the pavers whether it is clay concrete or stone because scrubbing material depend on it. To clean pavers you can use a scrubbing brush and water with a little amount of regular household detergent. Let the solution sit for fifteen minutes before scrubbing off with a broom.
Pavers add to the beauty of your landscape. A well maintained pavement reflects on the beauty of your house. Therefore it is essential that you maintain it well. Cleaning pavers would be easy once you know about pavers. Choosing wrong cleaning materials and faulty cleaning methods spoil the look of pavements. Therefore it is important that you learn about pavers before venturing into cleaning. Concrete or limestone is generally used in making pavers. Often bricks and natural stones are also used. You should ensure that pavers are sealed as soon as they are laid in your backyard driveways or patio. If you do not seal it stains and cracks on the surface of the pavers can damage your pavements soon.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.
A solution of bleach powder and water in a proportion of 1:10 can also be used for cleaning pavers. Apply the solution over the pavers with a brush and then scrub. Remember that bleach can cause discoloration. Therefore try it on one of the pavers in a corner and see the result before you start cleaning. For removing paint from pavers paint thinner can be applied on the pavers and then scrape it out with a rag carefully. The most difficult job is to remove rust stains from pavers. When the normal methods do not work use an appropriate chemical with the help of a professional. After cleaning pavers allow it to dry.