Adelina YolandeD uffet Pavers June 17th, 2018 - 19:32:25
We frequently install thin pavers on top of base material when the project calls for it. For instance if we are remodeling an existing pool deck and the client wants to expand the deck area we will simply excavate the addition compact four inches of base material and install the thin pavers on top so that they are flush with the thin pavers we just installed over top of the existing pool deck. The reason we choose to use a thin paver in this example is to maintain color shade and variation consistency throughout the entire project. Thick and thin pavers never match exactly because they are manufactured at different times using different aggregates. The variation in color dye blending and moisture content of the sand and aggregates during the manufacturing process is what gives each batch of pavers its own distinct look.
A solution of bleach powder and water in a proportion of 1:10 can also be used for cleaning pavers. Apply the solution over the pavers with a brush and then scrub. Remember that bleach can cause discoloration. Therefore try it on one of the pavers in a corner and see the result before you start cleaning. For removing paint from pavers paint thinner can be applied on the pavers and then scrape it out with a rag carefully. The most difficult job is to remove rust stains from pavers. When the normal methods do not work use an appropriate chemical with the help of a professional. After cleaning pavers allow it to dry.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.
Unsealed interlocking pavers are susceptible to staining chipping and growth of creepers through the cracks and edges. Although pavers require minimum maintenance regularly cleaning of the pavers and occasionally sealing them is necessary to preserve the well-tended look of your pristine patio or driveway. Sealing pavers is quite easy considering that a lot of good quality acrylic based sealants are available in the market. It is important to identify the material of the pavers whether it is clay concrete or stone because scrubbing material depend on it. To clean pavers you can use a scrubbing brush and water with a little amount of regular household detergent. Let the solution sit for fifteen minutes before scrubbing off with a broom.