Adalie Charline Parent Pavers June 17th, 2018 - 18:54:52
Travertine Pavers: This type of paver resides to a larger family of stone called limestone or also called calcium carbonate. Marble is also a form of limestone that has had additional heat and pressure applied to it by the earths crust. Travertine is created by minerals liquefy in ground water and then being deposited on the earths surface by natural springs rivers or geysers. Travertine pavers can be purchased in many different colors including beige ivory walnut noce and gold. Iron compounds or other types of impurities of an organic nature are what give the travertine its color. If aesthetics are the main goal for the homeowner then one must really look at going with travertine pavers.
In addition to the pattern you create with pavers on the deck around the pool you can also create irregular shapes and patterns for other areas around the pool. For example you can use irregular shaped pavers to create steppingstones as the entrance to the pool deck or patio. Irregular shapes such as stone pavers can create a decorative look such as to surround flowerbeds or create small walls to separate one area of the yard from another. You can also combine different shaped pavers to add a different design effect. Combining different shapes of pavers allows you to create unique designs that set your outdoor design and décor apart from the neighbors and other people you know.
After fixing any sagging areas look for individual pavers that are sitting higher or lower than the surrounding pavers. A paver that sits higher can often be leveled by using a rubber mallet to force it into its proper position. If its too high or doesnt move you may have to remove it so you can remove some of the sand thats below the paver. If it sits low youll have to remove it to add sand until its level. To remove the paver you can purchase a paver removal tool or you can use a small pry bar to loosen the paver and lift it out of its space being careful not to crack or chip the paver. Its a good idea to pressure wash the surface on a yearly basis. Pressure Washing cleans the surface of your pavers and also remove much of the organic material growing between the pavers. Removing the organic material reduces the amount of bugs living in your paver area and helps keep the pavers stable.
Your paver contractor should be able to tell you offhand which material is used and how much is needed. Obviously if a paver contractor cant explain this thoroughly to you its time to move on to a new paver contractor. The foundation of the paver installation process must be precise. The soil density is vital to the paver installation process and if you want the paver installation to last it really is best to call in a qualified professional paver contractor. A weak or saturated area of soil may not reach the required density levels for proper paver installation and then naturally the area would need to be modified in order for the pavers to lay properly. The basic goal outside of beautiful and sound construction of the paver area is to create the soil foundation a minimum of 95% Proctor density. Without great enough density the inevitable is bound to happen sooner or later and the pavers may crack split or cave in under you without warning. A qualified paver contractor can explain exactly how this density requirement applies to your property and what can be done to improve it prior to the paver installation.