Adalene Astrid Cuillerier Pavers June 17th, 2018 - 17:52:47
After fixing any sagging areas look for individual pavers that are sitting higher or lower than the surrounding pavers. A paver that sits higher can often be leveled by using a rubber mallet to force it into its proper position. If its too high or doesnt move you may have to remove it so you can remove some of the sand thats below the paver. If it sits low youll have to remove it to add sand until its level. To remove the paver you can purchase a paver removal tool or you can use a small pry bar to loosen the paver and lift it out of its space being careful not to crack or chip the paver. Its a good idea to pressure wash the surface on a yearly basis. Pressure Washing cleans the surface of your pavers and also remove much of the organic material growing between the pavers. Removing the organic material reduces the amount of bugs living in your paver area and helps keep the pavers stable.
A common question that we encounter is whether you can use a thin paver on top of base material. The answer is not absolute. In reality it depends on the circumstances of the project and the proficiency of the crew or individual installing the pavers in the first place. The one aspect of the project that must remain constant if considering the use of thin pavers over base is that the area to be paved must only be used as a pedestrian area that wont endure the weight of vehicular traffic. Using a thin paver on compacted base is typically frowned upon within the paver industry. They are normally used to remodel an existing concrete tile or acrylic surface.
In fact you can typically notice a serious difference between any two paver areas in color shade or variation whether these areas were simply produced at different times or theres a difference in product thickness. This aesthetic sacrifice does not work for most clients and using a thin paver over prepared base for a purely pedestrian area is completely functional other than the aforementioned compaction difference when compared with a thick paver. If a client is simply interested in a new paver patio then thick pavers are the order of the day. Believe or not but thick pavers cost the same as thin pavers! Therefore there is not a difference in the project cost for the client when choosing to construct a brand new patio. Occasionally however a client simply likes the look be it shape or color of a thin paver vendor better than any of the options from the thick paver option. If this is the case we maintain that the aesthetics are the main priority of the project and we will utilize the thin pavers over prepared base.
It is advised to lay pavers in the sun. If your pavers dont get enough sunlight there would be a chance of them getting infested with moss. This not only degrades the appearance of the pavers but also decreases their durability. Sealing pavers can prevents algae growth. Another problem often springs up due to the salt present in most of the pavers; efflorescence. This is a white chalky residue that forms on the surface of the pavers in contact with water or on its own. This can be cleaned using concentrated cleaners. Sealing pavers minimizes formation of the residue. Pavers being regularly tread on must be cleaned and polished to keep them intact for a long time.