Adalene Astrid Cuillerier Pavers June 17th, 2018 - 17:52:53
Pool pavers are a popular material for creating decks and patios around the pool. The three primary materials that pavers come in are stone cement and brick. Stone pavers are a natural material so these pavers traditionally come in a rectangle shape. Since brick and cement pavers are manmade you can find pavers in different shapes that allow you to create the design or look you want. Square and rectangular pavers are the best choice for pool pavers because these pavers have smooth edges and textured surfaces. The shape of the paver affects the pattern you can create. A paver shaped like a zigzag for example can create an interlocking pattern. Square pavers on the other hand create a side-by-side pattern. Traditionally pool patterns include square and rectangular pavers to sit side-by-side but you can also turn the square and rectangular pavers at an angle to create a diamond pattern.
Concrete pavers are a popular outdoor flooring surface. Concrete paving is very porous and stains easily. Its high porosity makes it particularly prone to salt efflorescence. Due to the use of high quality invisible impregnating ingredients in the sealing agent sealed pavers are protected for a long period of time. The durability of pavers is increased four-fold by protecting them. Pavers are the elements of the house that suffer maximum exposure to extreme weather pollution dirt grease and load conditions and therefore they stand a higher risk of being damaged. Low maintenance - The biggest benefit of a coated surface is that it does not require high maintenance. Dirt and other dust do not stick to the film making it easier to wash and keep clean from accumulated dust and debris. A simple wash will ensure your pavers preserve that pristine appearance for many years to come.
Paver manufacturers are in business to produce as many pavers as quickly and as efficiently as they can. When they have to shut the system down to change out shape molds and adjust machinery to accommodate thin paver thickness they lose a lot of valuable production time. It can take hours to switch from one mold to the next. Additionally since thin pavers arent ordered as often the order quantities are frequently less and the manufacturer is forced to produce less pavers per mold and color. This inefficiency causes increased costs for the producers and they pass those costs on to their customers. So even though thin pavers use fewer raw materials to be produced they take up more time and time is money.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.