Adalene Astrid Cuillerier Pavers July 17th, 2018 - 09:38:13
Thin pavers were created to remodel existing pool decks patios sidewalks and front entries. They are perfect for any non-vehicular application that remodels an existing concrete slab. By a technical definition thin pavers are not considered pavers. Instead they are considered to be a tile. Their thickness relative to their shape prevents them from being considered a paver. Typically thin pavers are anywhere from three quarters of inch in thickness to an inch and a quarter. Since they are about half the thickness of regular pavers they should cost less right? Unfortunately on a material only basis thin pavers cost the same as thick pavers. The reason for this is that overwhelmingly thick pavers are in much higher demand than thin pavers. Therefore it is a burden on the production company to produce their less frequently demanded thin counterparts.
A solution of bleach powder and water in a proportion of 1:10 can also be used for cleaning pavers. Apply the solution over the pavers with a brush and then scrub. Remember that bleach can cause discoloration. Therefore try it on one of the pavers in a corner and see the result before you start cleaning. For removing paint from pavers paint thinner can be applied on the pavers and then scrape it out with a rag carefully. The most difficult job is to remove rust stains from pavers. When the normal methods do not work use an appropriate chemical with the help of a professional. After cleaning pavers allow it to dry.
In fact you can typically notice a serious difference between any two paver areas in color shade or variation whether these areas were simply produced at different times or theres a difference in product thickness. This aesthetic sacrifice does not work for most clients and using a thin paver over prepared base for a purely pedestrian area is completely functional other than the aforementioned compaction difference when compared with a thick paver. If a client is simply interested in a new paver patio then thick pavers are the order of the day. Believe or not but thick pavers cost the same as thin pavers! Therefore there is not a difference in the project cost for the client when choosing to construct a brand new patio. Occasionally however a client simply likes the look be it shape or color of a thin paver vendor better than any of the options from the thick paver option. If this is the case we maintain that the aesthetics are the main priority of the project and we will utilize the thin pavers over prepared base.
Your paver contractor should be able to tell you offhand which material is used and how much is needed. Obviously if a paver contractor cant explain this thoroughly to you its time to move on to a new paver contractor. The foundation of the paver installation process must be precise. The soil density is vital to the paver installation process and if you want the paver installation to last it really is best to call in a qualified professional paver contractor. A weak or saturated area of soil may not reach the required density levels for proper paver installation and then naturally the area would need to be modified in order for the pavers to lay properly. The basic goal outside of beautiful and sound construction of the paver area is to create the soil foundation a minimum of 95% Proctor density. Without great enough density the inevitable is bound to happen sooner or later and the pavers may crack split or cave in under you without warning. A qualified paver contractor can explain exactly how this density requirement applies to your property and what can be done to improve it prior to the paver installation.