Adelina YolandeD uffet Pavers July 13th, 2018 - 09:10:53
When you choose an interior floor covering you have many different material choices. The same holds true for choosing pool or outdoor area pavers. Pool patios and decks and sidewalks use pavers made of concrete stone or brick. These are the three most common types of materials for pavers. The paver material you choose can affect the design you can create. Since concrete and brick pavers are manmade you can find these pavers in different shapes and sizes. Stone pavers on the other hand are natural so it limits the options to more traditional shapes. The summer and warmer months of the year means spending more time outdoors in our backyards and around the pool.
Stone Pavers: This type of paver will give spectacular beauty when decorating your residential place. Stone pavers are comprised of premium natural stones that are extremely durable; thus providing protection against excessive weight. Weather a problem? Not with these. They also have history by their side. They have been used for a millennium. Such an example is the old roads throughout Europe or Asia. Common types of stone pavers are Granite Marble Bluestone and Porphyry. Marble paver are commonly used for the patio deck fireplaces and bathrooms. Granite pavers are commonly used for the patio deck pool deck driveway and walkway. Bluestone pavers are a common idea for gardens. Finally Porphyry pavers are used for walkway mostly.
After fixing any sagging areas look for individual pavers that are sitting higher or lower than the surrounding pavers. A paver that sits higher can often be leveled by using a rubber mallet to force it into its proper position. If its too high or doesnt move you may have to remove it so you can remove some of the sand thats below the paver. If it sits low youll have to remove it to add sand until its level. To remove the paver you can purchase a paver removal tool or you can use a small pry bar to loosen the paver and lift it out of its space being careful not to crack or chip the paver. Its a good idea to pressure wash the surface on a yearly basis. Pressure Washing cleans the surface of your pavers and also remove much of the organic material growing between the pavers. Removing the organic material reduces the amount of bugs living in your paver area and helps keep the pavers stable.
It is advised to lay pavers in the sun. If your pavers dont get enough sunlight there would be a chance of them getting infested with moss. This not only degrades the appearance of the pavers but also decreases their durability. Sealing pavers can prevents algae growth. Another problem often springs up due to the salt present in most of the pavers; efflorescence. This is a white chalky residue that forms on the surface of the pavers in contact with water or on its own. This can be cleaned using concentrated cleaners. Sealing pavers minimizes formation of the residue. Pavers being regularly tread on must be cleaned and polished to keep them intact for a long time.