Adalene Astrid Cuillerier Outdoor Paver June 17th, 2018 - 17:44:32
Natural Stone pavers are quarried stone which are cut to the right size. Generally these pavers are laid end to end which does require more labor time. There is little maintenance needed and the stone pavers will last a lifetime. On a per square foot basis most stone pavers will cost $10.00. If you choose unusual or rare stones the cost could be up to $30 per square foot. Concrete pavers are colored at the manufacturer and may fade over time. To prevent this the pavers can be cleaned and sealed. Concrete pavers are priced at $5 to $10 per square foot and are installed for an additional $5 to $10 per square foot. Sand-set is an economical installation method. Soil and gravel layer compaction is necessary for stability.
Think about your budget. This is another very important consideration when it comes to choosing pavers for your home. Look at how much you can afford to spend on the entire project then work out all your other costs. What is left over is what you can afford to spend on the paving stones you will use. Regardless of whether you have sandstone travertine bluestone granite or slate pavers in mind for your project take into account the above tips to determine whether you are making the right choice for your home. Even if you have your heart set on one particular kind of stone it is important that you make sure it will make your paved area safe and secure when the project is complete.
Power wash brick paver areas using a 2700 psi power washer or greater. You may or may not need to use a paver cleaner during this process. Sweep joint sand into all the joints of the pavers and water down with a light spray from a garden hose. Sweep sand and water down a second time to ensure joints are full of joint sand. Once dry confirm joints are full with joint sand and move on to the next step. Having these joints completely filled and compacted will help maintain paver stability. Apply a joint stabilizing sealer on all the paver areas. The sealer hardens the sand which helps prevent water intrusion in the joints and insects digging through it! Follow the instructions of the manufacturer on how to apply sealer.
Concrete pavers are 100% manufactured material. It is made with two ingredients. Cement and aggregate. It can be manufactured and produced to withstand any kind of harsh weather conditions and endure high or low traffic areas. It is available in different styles for different applications. Concrete pavers are made to look and resemble natural stone at a fraction of a cost of real stones. These pavers are commonly used for those on a tight budget but want to have the look and feel of natural stone. There are different colors to choose from. Dyes and pigments are added during the manufacturing process to produce these different colors.