ChristinaJudy Pavers June 17th, 2018 - 17:02:31
In addition to the pattern you create with pavers on the deck around the pool you can also create irregular shapes and patterns for other areas around the pool. For example you can use irregular shaped pavers to create steppingstones as the entrance to the pool deck or patio. Irregular shapes such as stone pavers can create a decorative look such as to surround flowerbeds or create small walls to separate one area of the yard from another. You can also combine different shaped pavers to add a different design effect. Combining different shapes of pavers allows you to create unique designs that set your outdoor design and décor apart from the neighbors and other people you know.
Pavers made of concrete go well with flagstone brick and concrete walkways or patios. If you live in climates where winter temperatures dip below zero concrete pavers are a good choice. Theyre able to hold up well in extreme temperatures. Choose pavers in shades such as ochre pink bisque white or sand. Pavers come in keyhole x-shape y-shape pentagon hexagon and fan designs. Pavers are made of sandstone blue stone granite and limestone as well. Such pavers are typically quite pricey. These kinds of pavers are usually used for patios and sidewalks or around pools or fountains. You can choose pavers made of these materials in a variety of geometric designs.
Choose from hexagonal rectangular octagonal or square styles. These types of pavers are exceptionally durable and can last well over several decades. Another type of paver is a turf paver. These hollow pavers are installed using a grid system with a concrete or recycled plastic foundation. Upon installation of this grid also referred to as a "honeycomb" system gravel and topsoil are added inside. The pavers making up these grids encourage the growth of grass over the structure which creates an incredibly strong pavement made of turf or grass. These eco-friendly pavers are used to reduce the erosion of the soil and are a great "green" alternative to 100% concrete pavements.
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.