Adalie Charline Parent Pavers June 22nd, 2018 - 10:40:31
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.
Pavers add to the beauty of your landscape. A well maintained pavement reflects on the beauty of your house. Therefore it is essential that you maintain it well. Cleaning pavers would be easy once you know about pavers. Choosing wrong cleaning materials and faulty cleaning methods spoil the look of pavements. Therefore it is important that you learn about pavers before venturing into cleaning. Concrete or limestone is generally used in making pavers. Often bricks and natural stones are also used. You should ensure that pavers are sealed as soon as they are laid in your backyard driveways or patio. If you do not seal it stains and cracks on the surface of the pavers can damage your pavements soon.
When you choose an interior floor covering you have many different material choices. The same holds true for choosing pool or outdoor area pavers. Pool patios and decks and sidewalks use pavers made of concrete stone or brick. These are the three most common types of materials for pavers. The paver material you choose can affect the design you can create. Since concrete and brick pavers are manmade you can find these pavers in different shapes and sizes. Stone pavers on the other hand are natural so it limits the options to more traditional shapes. The summer and warmer months of the year means spending more time outdoors in our backyards and around the pool.
Your job does not end with sealing pavers. You have to clean pavers regularly because damp weather makes pavers absorb moisture from the environment along with dust and can spoil the show of your pavement. So clean them and mop them regularly. Avoid using any highly concentrated chemicals that damage the environment. Always look for natural formulae for cleaning. You can use a high pressure cleaner and spray the pavers with salt water. For cleaning stains that are lighter a solution of detergent and warm water would be advisable. However stains of petrol or oil will not dissolve in water or soap. You can use a commercial product available in the market under the guidance of a professional. Another way of cleaning oil or petrol stains is the use of kitty litter on pavers on the previous night and sweep off the next day.