ChristinaJudy Pavers June 17th, 2018 - 17:00:53
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.
We spend a lot of time poolside or in our backyards when the weather is warm. Poolside locations make perfect spots for hosting outdoor festivities. Whether its hosting parties or to spend quality time with our friends and family members you can turn your backyard into an oasis. If you are looking to create or update an outdoor area such as your pool deck or patio then pavers can create the look and feel you seek. In short a pool paver is type of floor or ground covering for outdoor use. Around the pool situating pavers together creates a patio or deck. Using pavers together is similar to installing a floor in your home but pavers hold up to the outside elements.
In addition to the pattern you create with pavers on the deck around the pool you can also create irregular shapes and patterns for other areas around the pool. For example you can use irregular shaped pavers to create steppingstones as the entrance to the pool deck or patio. Irregular shapes such as stone pavers can create a decorative look such as to surround flowerbeds or create small walls to separate one area of the yard from another. You can also combine different shaped pavers to add a different design effect. Combining different shapes of pavers allows you to create unique designs that set your outdoor design and décor apart from the neighbors and other people you know.
Sealing pavers immediately after installation decreases chances of getting displaced or disfigured. The pavers set in sand move and adjust so in case a piece of pavers is chipped off in the process immediately replace it. So keeping a few extra pavers in stock is a good idea in case the particular design suddenly goes off the market. You dont want to ruin a perfectly symmetrical patio with one mismatched paver. If the pavers are laid on sand check them annually to see if the pieces have sunk. Brush in sand in the space in between them if necessary. The sand in the joints should be half as high as the level of the pavers. Sealing concrete in between prevents this problem.