Adalene Astrid Cuillerier Pavers June 17th, 2018 - 17:47:48
Inspect the joints of the pavers for sand loss. If the sand is more than ¼ inch below the joint surface youll have to "re-sand" the pavers. To re-sand you must use paver sand. You can buy this in bags at Lowes and Home Depot or at a brick yard. Spread the sand our on the pavers and using a push broom sweep the sand back and forth at a 45 degree angle from the joint lines until the level is 1/4th to 1/8th of an inch to the top of the joint surface. After the pavers have been adjusted cleaned and re-sanded (and every time after re-sanding) you want to seal your pavers with a good quality sealer. Sealing your pavers will protect the pavers from most kind staining and it will harden the joint sand locking your pavers into place and preventing anthills and weeds from growing between pavers. A good quality sealer will prevent a haze from forming on the paver surface caused from moisture in the paver when sealing. If you currently see a haze on the surface of your pavers from previous sealing youll have to strip the existing sealer before applying new sealer.
Structural integrity - An indispensable part of enhancing ones pavers is the process of re-sanding the joints which helps in its stability reduces paver loosening and cracks while effectively reducing the effects of erosion on the pavers preventing the exposure of the structural aggregate. A variety of sealing pavers also provides resistance against salts acids and other corrosive material. Sealing pavers also helps in conservation of water as it protects the joint-sand from erosion. Appearance - The paver wears a clean and glossy look once it is sealed. Sealing paver enhances the appearance of its color. Sealers use ingredients which protect the pavers from fading due to exposure to sunlight.
A common question that we encounter is whether you can use a thin paver on top of base material. The answer is not absolute. In reality it depends on the circumstances of the project and the proficiency of the crew or individual installing the pavers in the first place. The one aspect of the project that must remain constant if considering the use of thin pavers over base is that the area to be paved must only be used as a pedestrian area that wont endure the weight of vehicular traffic. Using a thin paver on compacted base is typically frowned upon within the paver industry. They are normally used to remodel an existing concrete tile or acrylic surface.
What is the difference between thick and thin pavers? Where should you use either product? Do thick pavers cost more than thin pavers? Can I install thin pavers on top of my driveway? These are common questions we get from homeowners all of the time. Thick pavers range from two and three eighths of an inch to three and half inches in thickness. They are typically used in new construction. When you build a new home and choose pavers for your hardscaping thick pavers will be used. If you add a new pool to your existing home and decide to install pavers as the decking surface thick pavers will be used. If you want a new patio in your backyard thick pavers will be used. If you want to redo your driveway with pavers the existing concrete should be removed and thick pavers will then be installed on top of base material.