Aceline Kari Bernier Pavers March 21st, 2018 - 08:55:01
After fixing any sagging areas look for individual pavers that are sitting higher or lower than the surrounding pavers. A paver that sits higher can often be leveled by using a rubber mallet to force it into its proper position. If its too high or doesnt move you may have to remove it so you can remove some of the sand thats below the paver. If it sits low youll have to remove it to add sand until its level. To remove the paver you can purchase a paver removal tool or you can use a small pry bar to loosen the paver and lift it out of its space being careful not to crack or chip the paver. Its a good idea to pressure wash the surface on a yearly basis. Pressure Washing cleans the surface of your pavers and also remove much of the organic material growing between the pavers. Removing the organic material reduces the amount of bugs living in your paver area and helps keep the pavers stable.
Unsealed interlocking pavers are susceptible to staining chipping and growth of creepers through the cracks and edges. Although pavers require minimum maintenance regularly cleaning of the pavers and occasionally sealing them is necessary to preserve the well-tended look of your pristine patio or driveway. Sealing pavers is quite easy considering that a lot of good quality acrylic based sealants are available in the market. It is important to identify the material of the pavers whether it is clay concrete or stone because scrubbing material depend on it. To clean pavers you can use a scrubbing brush and water with a little amount of regular household detergent. Let the solution sit for fifteen minutes before scrubbing off with a broom.
The only difference however between using a thin paver and thick paver over compacted base is that you cannot compact the thin paver once the project is complete. In both instances the base material is compacted but once a thick paver project is completed it is standard practice to spread joint sand over top and compact the field once or twice. The quality thickness and careful compaction of the base material is truly what gives any new paver area its longevity and as long as this crucial step is tended to appropriately then the longevity of the paver project will not be compromised regardless of the paver thickness.
When you choose an interior floor covering you have many different material choices. The same holds true for choosing pool or outdoor area pavers. Pool patios and decks and sidewalks use pavers made of concrete stone or brick. These are the three most common types of materials for pavers. The paver material you choose can affect the design you can create. Since concrete and brick pavers are manmade you can find these pavers in different shapes and sizes. Stone pavers on the other hand are natural so it limits the options to more traditional shapes. The summer and warmer months of the year means spending more time outdoors in our backyards and around the pool.