Adalie Charline Parent Pavers July 18th, 2018 - 09:02:12
Sealing pavers immediately after installation decreases chances of getting displaced or disfigured. The pavers set in sand move and adjust so in case a piece of pavers is chipped off in the process immediately replace it. So keeping a few extra pavers in stock is a good idea in case the particular design suddenly goes off the market. You dont want to ruin a perfectly symmetrical patio with one mismatched paver. If the pavers are laid on sand check them annually to see if the pieces have sunk. Brush in sand in the space in between them if necessary. The sand in the joints should be half as high as the level of the pavers. Sealing concrete in between prevents this problem.
Cleaning pavers should not be put off. The surfaces of the pavers are porous and quickly absorb oil; the longer the oil remains the deeper it sets making the stain permanent. Get oil removers from a local hardware store but make sure it is not acidic. Acidic chemicals can react with the salt of the pavers and damage it. Weeds growing in the pavers are a nuisance especially when they force cracks through the tiles themselves! Sealing pavers mostly avoid this but sometimes if the weeds are not plucked for a long time they can be dislodged from their slots. Apply a weed-killer to get good results. If the pavers are not matt finish applying a stone polish can prevent weeds from growing profusely along with providing protection. If you really want some greenery in between your pavers scatter short rooting grass or herb seeds evenly along the joints.
Choose from hexagonal rectangular octagonal or square styles. These types of pavers are exceptionally durable and can last well over several decades. Another type of paver is a turf paver. These hollow pavers are installed using a grid system with a concrete or recycled plastic foundation. Upon installation of this grid also referred to as a "honeycomb" system gravel and topsoil are added inside. The pavers making up these grids encourage the growth of grass over the structure which creates an incredibly strong pavement made of turf or grass. These eco-friendly pavers are used to reduce the erosion of the soil and are a great "green" alternative to 100% concrete pavements.
A solution of bleach powder and water in a proportion of 1:10 can also be used for cleaning pavers. Apply the solution over the pavers with a brush and then scrub. Remember that bleach can cause discoloration. Therefore try it on one of the pavers in a corner and see the result before you start cleaning. For removing paint from pavers paint thinner can be applied on the pavers and then scrape it out with a rag carefully. The most difficult job is to remove rust stains from pavers. When the normal methods do not work use an appropriate chemical with the help of a professional. After cleaning pavers allow it to dry.